Loud engine sound / stalls on start - PocketBikeForum.com

RepsolReplica · 08-27-2006, 04:28 PM

Im having too much trouble ! ive cleaned and drained the carb, i try to start the bike but it makes a loud engine noise when i put throttle and just seems to stall couple seconds later.
Any solutions ?

*Sleeves* · 08-27-2006, 04:52 PM

U dropped the bowl at the bottom and cleaned out the jet ?
and did u put carb back together properly , meaning the slide ?

RepsolReplica · 08-27-2006, 05:57 PM

yes i did everything is in normal position , i have tried everything.

Wheelie_Machine · 08-27-2006, 07:10 PM

my bike would idle but when id apply the throttle it would stall i changed the base gasket and runs again as for loud noise check your exhaust bolts to see if there loose?

Admin · 08-28-2006, 12:11 AM

Post edited, bold is used to press a point or a word, not for the entire post.

Jay-Star · 08-28-2006, 02:35 AM

If you are having lots of problems, try contacting the guy you bought it from, I believe his number is: (877) 937 3898

08-27-2006, 04:28 PM	#1 (permalink)
RepsolReplica Decent Rider Join Date: Aug 2006 My Gallery Real Name: Jimmy Pocketbikes Owned: 1 Location: Calgary, Alberta Posts: 28	Loud engine sound / stalls on start Im having too much trouble ! ive cleaned and drained the carb, i try to start the bike but it makes a loud engine noise when i put throttle and just seems to stall couple seconds later. Any solutions ? Last edited by Admin : 08-28-2006 at 12:10 AM.

08-27-2006, 04:52 PM	#2 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,568	U dropped the bowl at the bottom and cleaned out the jet ? and did u put carb back together properly , meaning the slide ? __________________ RCMRRA OWNER 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 07' Pitsterpro 125cc 08' CBR125r 96' Gsx-r 600

08-27-2006, 07:10 PM	#4 (permalink)
Wheelie_Machine Pocketbike Lord Join Date: May 2006 My Gallery Real Name: geoff Pocketbikes Owned: 3 Location: oakbank Posts: 582	my bike would idle but when id apply the throttle it would stall i changed the base gasket and runs again as for loud noise check your exhaust bolts to see if there loose? __________________ JUST GIVE-ER! proud owner of elite rep, troublsome cag! and a pocket dirt bike! #86

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Article #13: How does a 2 stroke motor work?	Admin	Articles	0	01-25-2006 02:40 PM

08-27-2006, 05:57 PM	#3 (permalink)
RepsolReplica Decent Rider Join Date: Aug 2006 My Gallery Real Name: Jimmy Pocketbikes Owned: 1 Location: Calgary, Alberta Posts: 28	yes i did everything is in normal position , i have tried everything.

08-28-2006, 02:35 AM	#6 (permalink)
Jay-Star Pocketbike Master Join Date: Jun 2006 My Gallery Real Name: J. Pocketbikes Owned: 10 or more Posts: 168	If you are having lots of problems, try contacting the guy you bought it from, I believe his number is: (877) 937 3898