cranks over will not start..though - PocketBikeForum.com

californiapocket · 05-04-2007, 12:46 PM

Ok.
pull start has sprang the coil so now i only have electric start to work with.
I know this bike runs because I pull started it and used it but then i mess up the pull start.

when i touch metal to metal the starter solenoid turns over which equals good battery and good starter.

the ignition lock when turn off positon did power it off (when i could pull start it) so i think it works too

question

?what is the switch below the gas throttle?
the guy i bought this bike from said it must be press in to turn on electricaly but when i try to do---nothing no crank or anything

I'm thinking it could be bad??HOw do i test this?

frikin_bike! · 05-04-2007, 02:53 PM

here ya go buddy, this will work http://www.pocketbikeforum.com/tutor...e-stallin.html

californiapocket · 05-04-2007, 03:08 PM

well...
i should clarify it cranks over only when solenoid is touched metal to metal.

no crank over no sound no nothing when key is turned on and attempted to start electrically.

Admin · 05-08-2007, 07:33 PM

are you pulling in the clutch when you turn it over?

What happens when you try to kick start it?

05-04-2007, 12:46 PM	#1 (permalink)
californiapocket Hi I'm new here Be nice to me Join Date: May 2007 My Gallery Real Name: al Pocketbikes Owned: 1 Posts: 2	cranks over will not start..though Ok. pull start has sprang the coil so now i only have electric start to work with. I know this bike runs because I pull started it and used it but then i mess up the pull start. when i touch metal to metal the starter solenoid turns over which equals good battery and good starter. the ignition lock when turn off positon did power it off (when i could pull start it) so i think it works too question?what is the switch below the gas throttle? the guy i bought this bike from said it must be press in to turn on electricaly but when i try to do---nothing no crank or anything I'm thinking it could be bad??HOw do i test this?

05-04-2007, 02:53 PM	#2 (permalink)
frikin_bike! Moderator One of the good guys Join Date: Jan 2006 My Gallery Real Name: Jeremy Pocketbikes Owned: 3 Location: RM of Portage la Prairie, mb Posts: 940	here ya go buddy, this will work http://www.pocketbikeforum.com/tutor...e-stallin.html __________________ winners never win, the people that take you down and take your flag. They are the winners

05-04-2007, 03:08 PM	#3 (permalink)
californiapocket Hi I'm new here Be nice to me Join Date: May 2007 My Gallery Real Name: al Pocketbikes Owned: 1 Posts: 2	...ok but well... i should clarify it cranks over only when solenoid is touched metal to metal. no crank over no sound no nothing when key is turned on and attempted to start electrically.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.pocketbikeforum.com/repairs-upgrades/1737-cranks-over-will-not-start-though.html
Posted By	For	Type	Date
PocketBikeForum.ca - Your portal to the world of pocketbikes	This thread	Refback	05-05-2007 12:49 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new bike wont start	xracer7	Repairs And Upgrades	12	04-04-2007 03:27 PM
loncin super pocket bike wont start why	karatemike	Repairs And Upgrades	2	02-19-2007 12:01 AM
x6 wont start	mdog5674	Repairs And Upgrades	1	11-13-2006 02:20 PM
Pull start pawl problem	redrocket	Repairs And Upgrades	10	08-11-2006 12:04 AM
why won't my pb start?	BigRedMachine	General Chat	1	06-03-2006 03:42 AM