Help!! Chain adjustment - Page 2 - PocketBikeForum.com

theNatural · 06-05-2007, 09:11 PM

oh alrite, thanks. =D

*Sleeves* · 06-05-2007, 10:17 PM

thats right !

theNatural · 06-06-2007, 12:40 AM

cool, i am going to take a picture of my C1 liquid cooled. =D

theNatural · 06-08-2007, 07:15 PM

hey guys I still cant find it, i tried fixing it today but i dont know which ones you are talking about, i only see the brake tensioner. here i took a pic of it, if you can let me know which one to mingle with that would be great!

theNatural · 06-08-2007, 07:17 PM

http://www.pocketbikeforum.com/repai...c1-liquid.html <--- Link to picture sorry accidently posted there =D

WPG Racer · 06-08-2007, 07:49 PM

i dont know how to explain it anymore. its on the very very very very very very very very end of the frame in the back. they point the same way the exhaust does, back. you wheel is held to the bike by two pieces of frame. one on each side of the wheel. there is a bolt there that you tighten or loosen to tighten and loosen the chain.

theNatural · 06-09-2007, 01:34 AM

oh ok is it this...

WPG Racer · 06-09-2007, 11:13 AM

YES!!!! its the screw to on the very right on the inside of the green circle. loosen the big bolt u see in the circle and the tighten the chain using the little bolt.

theNatural · 06-09-2007, 04:50 PM

Hey thanks i got my chain tightened but i didnt really used the little bolt to tighten i pulled the rear wheel back and retightend everything. =D

cag07 · 06-11-2007, 02:08 AM

you have to tighten those little bolts on the end of the chain ten. or the chain will get lose again.those are there to straighten your chain(pinion gear-to sprocket and to keep the chain tight because the axle nuts will loose do to bumps and vibration.tighten those first,make sure your chain is true,leve a 1/2" slack,by pushing up or down on the chain.when you are there then tighten the axle nuts.i turn my tention nuts a 1/4 turn just in case after i tighten up my axle nuts.

06-05-2007, 10:17 PM	#12 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,568	thats right ! __________________ RCMRRA OWNER 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 07' Pitsterpro 125cc 08' CBR125r 96' Gsx-r 600

06-08-2007, 07:49 PM	#16 (permalink)
WPG Racer Pocketbike Freak Join Date: Apr 2006 My Gallery Real Name: Yuri Pocketbikes Owned: 2 Location: Winnipeg, Manitoba Posts: 408	i dont know how to explain it anymore. its on the very very very very very very very very end of the frame in the back. they point the same way the exhaust does, back. you wheel is held to the bike by two pieces of frame. one on each side of the wheel. there is a bolt there that you tighten or loosen to tighten and loosen the chain. __________________

06-09-2007, 11:13 AM	#18 (permalink)
WPG Racer Pocketbike Freak Join Date: Apr 2006 My Gallery Real Name: Yuri Pocketbikes Owned: 2 Location: Winnipeg, Manitoba Posts: 408	YES!!!! its the screw to on the very right on the inside of the green circle. loosen the big bolt u see in the circle and the tighten the chain using the little bolt. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Gear Chain wont fit PLEASE HELP	killieboys9985	Repairs And Upgrades	1	04-23-2007 10:51 PM
Pocket Bike Chain Needed Asap!!!!!	pocketbike555	Winnipeg	2	09-01-2006 06:01 PM
Chain Tightness	Androu	Repairs And Upgrades	1	08-04-2006 10:27 PM
Needed Chain 4 Sunday!!!	pocketbike555	Repairs And Upgrades	3	06-29-2006 08:59 AM
Opinion on dual chain drive	threenailz	General Chat	33	04-02-2006 08:51 PM

06-05-2007, 09:11 PM	#11 (permalink)
theNatural Pocketbike Master Join Date: May 2007 My Gallery Real Name: Kevin Pocketbikes Owned: 2 Location: BC, Canada Posts: 134	oh alrite, thanks. =D

06-06-2007, 12:40 AM	#13 (permalink)
theNatural Pocketbike Master Join Date: May 2007 My Gallery Real Name: Kevin Pocketbikes Owned: 2 Location: BC, Canada Posts: 134	cool, i am going to take a picture of my C1 liquid cooled. =D

06-08-2007, 07:15 PM	#14 (permalink)
theNatural Pocketbike Master Join Date: May 2007 My Gallery Real Name: Kevin Pocketbikes Owned: 2 Location: BC, Canada Posts: 134	hey guys I still cant find it, i tried fixing it today but i dont know which ones you are talking about, i only see the brake tensioner. here i took a pic of it, if you can let me know which one to mingle with that would be great!

06-08-2007, 07:17 PM	#15 (permalink)
theNatural Pocketbike Master Join Date: May 2007 My Gallery Real Name: Kevin Pocketbikes Owned: 2 Location: BC, Canada Posts: 134	http://www.pocketbikeforum.com/repai...c1-liquid.html <--- Link to picture sorry accidently posted there =D

06-09-2007, 04:50 PM	#19 (permalink)
theNatural Pocketbike Master Join Date: May 2007 My Gallery Real Name: Kevin Pocketbikes Owned: 2 Location: BC, Canada Posts: 134	Hey thanks i got my chain tightened but i didnt really used the little bolt to tighten i pulled the rear wheel back and retightend everything. =D

06-11-2007, 02:08 AM	#20 (permalink)
cag07 Pocketbike Freak Join Date: Jun 2007 My Gallery Real Name: joey Pocketbikes Owned: 2 Location: swan hills,alberta Posts: 391	you have to tighten those little bolts on the end of the chain ten. or the chain will get lose again.those are there to straighten your chain(pinion gear-to sprocket and to keep the chain tight because the axle nuts will loose do to bumps and vibration.tighten those first,make sure your chain is true,leve a 1/2" slack,by pushing up or down on the chain.when you are there then tighten the axle nuts.i turn my tention nuts a 1/4 turn just in case after i tighten up my axle nuts.