nateskee

k i just got this bike..about a month old...i was riding it fine until it just ..died out...now i can rip the cord and it will turn on and go again for about another minute then just die...it makes a weird noise to...any ides whats wrong with it..sometimes the bike wont turn on at all wen i rip the cord...lemme kno

Hic

Maybe the shakiness of the bike made your idle screw go loose. Try tightening it.

__________________

I'm a newb at pocket bikes now, but one day I'll be pro :D .... I hope ._.

nateskee

wheres the idle screw? lol im completly new at this

Sleeves

New to this huh........
you from winnipeg ????
Anyhow , I am sure you have gotten to ride your new BEAST a few times .
Run the break in as you should and all !

Look around, you will find that most of the probs are posted somewhere......
I am guessing your carb , DIRTY!
Jet maybe , located at the bottom of the carb . 2 screws brass in color .
Open her up carefully , and slowly to insure you see where all the parts came from . It is the center jet that may need some cleaning .
Otherwise try new plug in her too.
Ge that sucka to 50 :1 fuel to oil mix ..........

Buddy , get to know your bike quick ....... your gonna need to ........

__________________
RCMRRA OWNER
06' P1 BMS competition BZM 15.5hp Open 50cc
05' DM Telai - ZPF 18 h.p Open 50cc
07' Pitsterpro 125cc
08' CBR125r
96' Gsx-r 600

Hic

Left side of your pocket bike, look through the fairings (the bike's body) and you should see a screw on the carb pointing out. Tighten it (clockwise) to give more gas during idle, so the bike starts easier. Make sure it's not too tight otherwise your bike will move by itself.

__________________

I'm a newb at pocket bikes now, but one day I'll be pro :D .... I hope ._.

nateskee

ok well i took the bike apart lat night after work and pretty much had everything layed out on the ground..i cleaned everything i could but when i took out the air filter the peice behind it had 1 stripped screw so i couldnt get that peice off:S..i cleaned everything else off and put it back together my bike wont even start now:S...its even leaking a little amount of gass but im sure i jsut need to do some tightening
..anyways im gunna take it apart again with proper tools and clean all the peices in warm soapy water and see what happens i have a jug out back mixed with 50:1 and im gunna put some new gas in it...wish me luck...ps im frmo ontario..hamilton

Hic

Did you tighten the idle screw?

__________________

I'm a newb at pocket bikes now, but one day I'll be pro :D .... I hope ._.

nateskee

uhh i did but i took apart the whole bike and stripped a few screws so im gunna get this thing from canadian tire that will fix that and let me take the screw off...i think my spark plug is broken to..any idea howmuch its gunna cost to get a new one...cuz after i took apart what i could and cleaned it, it wouldnt even start