New pocket bike HELP plz - Page 2 - PocketBikeForum.com

1swtz24 · 04-03-2008, 05:20 PM

i tried a different clutch and same result

*Sleeves* · 04-03-2008, 08:21 PM

hows the idle , is it high ?
to adjust. there is an idle screw on the side , screw it all the way in ( while bike is not running , and then back it out 1.5 - 2 turns . this is a great starting point for adjusting the idle .

1swtz24 · 04-03-2008, 09:39 PM

ill give that a shot tomorow... any other tips can help thanks

huckster · 04-05-2008, 12:28 PM

hey sleeves , how bout fuel problems. on the stand it doesnt need as much fuel to spin the tire but when you load it , it dies. check the infamous fuel valve and the fuel tank for plastic pcs. of crap in the tank and for kinks in the fuel line. good luck. if its an x bike hide it or blow it up. x bikes are like fat chicks, fun to ride but wouldnt be caught dead by your buddies ridin one.

1swtz24 · 04-05-2008, 05:12 PM

i left it on the stand and ran 2 tanks of fuel threw it... kids rode it for a bit.. each time got faster and faster.. now its running great and i can get on it and it goes like crazy.

thanks for ur help guys

*Sleeves* · 04-05-2008, 07:43 PM

Ah did not think of that one huck !

1swtz24 · 04-26-2008, 10:20 PM

its been sitting for a few weeks now.. and i went out today and it wont fire up.. got lots of gas... has spark.. but wont fire..

any suggestions?

*Sleeves* · 04-26-2008, 10:58 PM

check the carbs foat bowl , and clean main jet !
what happens is any crap from drilling holes in tank from china seem to get in jet a block it all up . also , if you where running it , then haven't for a while , any fuel / oil in the carb that is not drain or ran thru before putting away , the fuel will evaporate and leave the oil sitting there blocking the main jet !

1swtz24 · 04-26-2008, 11:25 PM

which is the main jet?

*Sleeves* · 04-26-2008, 11:31 PM

the one in the center

04-03-2008, 08:21 PM	#12 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	hows the idle , is it high ? to adjust. there is an idle screw on the side , screw it all the way in ( while bike is not running , and then back it out 1.5 - 2 turns . this is a great starting point for adjusting the idle . __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

04-05-2008, 12:28 PM	#14 (permalink)
huckster Pocketbike Lord Join Date: Sep 2005 My Gallery Location: wpg Posts: 919	hey sleeves , how bout fuel problems. on the stand it doesnt need as much fuel to spin the tire but when you load it , it dies. check the infamous fuel valve and the fuel tank for plastic pcs. of crap in the tank and for kinks in the fuel line. good luck. if its an x bike hide it or blow it up. x bikes are like fat chicks, fun to ride but wouldnt be caught dead by your buddies ridin one. __________________ employed and past owner of rivercity. givver sleeves

04-05-2008, 07:43 PM	#16 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	Ah did not think of that one huck ! __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

04-26-2008, 10:58 PM	#18 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	check the carbs foat bowl , and clean main jet ! what happens is any crap from drilling holes in tank from china seem to get in jet a block it all up . also , if you where running it , then haven't for a while , any fuel / oil in the carb that is not drain or ran thru before putting away , the fuel will evaporate and leave the oil sitting there blocking the main jet ! __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

04-26-2008, 11:31 PM	#20 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	the one in the center __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

04-03-2008, 05:20 PM	#11 (permalink)
1swtz24 Pocketbike Beginner Join Date: Apr 2008 My Gallery Real Name: Bill Pocketbikes Owned: 1 Posts: 11	i tried a different clutch and same result

04-03-2008, 09:39 PM	#13 (permalink)
1swtz24 Pocketbike Beginner Join Date: Apr 2008 My Gallery Real Name: Bill Pocketbikes Owned: 1 Posts: 11	ill give that a shot tomorow... any other tips can help thanks

04-05-2008, 05:12 PM	#15 (permalink)
1swtz24 Pocketbike Beginner Join Date: Apr 2008 My Gallery Real Name: Bill Pocketbikes Owned: 1 Posts: 11	i left it on the stand and ran 2 tanks of fuel threw it... kids rode it for a bit.. each time got faster and faster.. now its running great and i can get on it and it goes like crazy. thanks for ur help guys

04-26-2008, 10:20 PM	#17 (permalink)
1swtz24 Pocketbike Beginner Join Date: Apr 2008 My Gallery Real Name: Bill Pocketbikes Owned: 1 Posts: 11	its been sitting for a few weeks now.. and i went out today and it wont fire up.. got lots of gas... has spark.. but wont fire.. any suggestions?

04-26-2008, 11:25 PM	#19 (permalink)
1swtz24 Pocketbike Beginner Join Date: Apr 2008 My Gallery Real Name: Bill Pocketbikes Owned: 1 Posts: 11	which is the main jet?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode