starting instructions - PocketBikeForum.com

behappy40 · 03-30-2006, 04:28 AM

Just got a 49 cc hsr2. Added gas pulled cord and it flooded but will not start.
Need starting instructions before I rip it appart?

*Sleeves* · 03-30-2006, 11:08 AM

Make sure that the plug is clean , asnd that you are getting a spark , if not , from there you got ignition problems , sounds like theres fuel , but no fire ,,, right?
check that first!

Make sure that the magnets that are on ignition coil are a buciness card in thickness , away from flywheel !

Admin · 03-30-2006, 12:03 PM

Also make sure the choke is closed prior to starting. Some bikes are harder to start than others. You may need to keep pulling.

Please note - do not keep pulling for as long as your arm can. Pull it a few times (5 or so), wait 30 seconds and try again. Keep doing this and do not give it any gas (don't turn the throttle).

03-30-2006, 04:28 AM	#1 (permalink)
behappy40 Hi I'm new here Be nice to me Join Date: Mar 2006 My Gallery Posts: 1	starting instructions Just got a 49 cc hsr2. Added gas pulled cord and it flooded but will not start. Need starting instructions before I rip it appart?

03-30-2006, 11:08 AM	#2 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	Make sure that the plug is clean , asnd that you are getting a spark , if not , from there you got ignition problems , sounds like theres fuel , but no fire ,,, right? check that first! Make sure that the magnets that are on ignition coil are a buciness card in thickness , away from flywheel ! __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode