

|
| |||||||
| Repairs And Upgrades Got a problem and you can't solve it? Want to increase power but don't know the best way? Ask your questions in here! |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| | #1 (permalink) |
| Better than average | at the race today i couldnt turn the throttle more that 1/4 of a turn without the bike stalling. at home i took the carb apart and took the air filter off and cleaned them. when i put it back together gas comes dripping out the bottom of the carb at different places. it still happend after i checked all the bolts on the carb. also the white turn valve thing that shuts the fuel on/off is now loose and wont turn properly because the washer in the inside was all warped. anyone help me or know what i should do? Last edited by evan55 : 05-21-2006 at 07:23 PM. |
| | |
| | #2 (permalink) |
| Administrator Friends call me God ;) | If gas is coming out of the carb then you've got something (dirt) stuck in the needle. You'll need to take the carb off again and clean it again. Make sure when you're cleaning it that you use carb cleaner and not just gasoline (the carb cleaner will strip the gum off the carb that gas leaves behind). |
| | |
| | #3 (permalink) |
| Decent Rider Join Date: Jul 2006 My Gallery Real Name: tony Pocketbikes Owned: 2 Location: saskatchewan
Posts: 35
| also check your gaskets my carb was doin the same thing until i replaced them |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
| |
| All times are GMT -5. The time now is 09:47 AM. |
| RSS | RSS2 | XML |

