My new elite! - PocketBikeForum.com

2bamp · 05-11-2007, 04:04 PM

And here is mine.

pocketbike555 · 05-11-2007, 07:10 PM

swewet looking bike man where you get it??

thing · 05-16-2007, 06:41 PM

where do you get an elite who makes it

theNatural · 05-21-2007, 09:41 PM

cool bike!!

*Sleeves* · 05-27-2007, 12:48 AM

when you going to bring it out to ride ?

2bamp · 05-27-2007, 11:16 AM

The frame needs to be straightened first. The back wheel sits about 10-15mm to the left side, and I can't get the chain to align properly. I'm looking for a piece of pipe to slide over the swingarm tubes to bend them straight.

I have real Blata brake pads, new levers, Sava MRBs, new wheel bearings and a couple of other goodies to put into it. I also have to make better spacer for the rear engine mount. This is going to be my indoor racing machine.

pocketbike555 · 05-27-2007, 08:29 PM

i have the same problem with my motor mount my motor moves every time i hit the gas ive tried to tighten it but still nothing

2bamp · 05-27-2007, 08:47 PM

Get a bunch of 7/16" washers and use a stack of those on the bolt for the rear motor mount. The pieces of tubing that come from on the bike from the factory are useless. Measure the thickness of the spacer, and use enough washers to keep the spacing the same.

05-11-2007, 07:10 PM	#2 (permalink)
pocketbike555 Pocketbike Master Join Date: Oct 2005 My Gallery Real Name: Mike Pocketbikes Owned: 2 Location: winnipeg MB Posts: 161	swewet looking bike man where you get it?? __________________ If YoUr NoT LiViNg LiFe On tHe EdGe YoUr TaKiNg Up To MuCh SpAcE!!! <<PROUD OWNER OF AN ELITE REP LIQUID , C2 REP LIQUID >>

05-27-2007, 12:48 AM	#5 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	when you going to bring it out to ride ? __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

05-27-2007, 08:29 PM	#7 (permalink)
pocketbike555 Pocketbike Master Join Date: Oct 2005 My Gallery Real Name: Mike Pocketbikes Owned: 2 Location: winnipeg MB Posts: 161	i have the same problem with my motor mount my motor moves every time i hit the gas ive tried to tighten it but still nothing __________________ If YoUr NoT LiViNg LiFe On tHe EdGe YoUr TaKiNg Up To MuCh SpAcE!!! <<PROUD OWNER OF AN ELITE REP LIQUID , C2 REP LIQUID >>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My New Elite pics	pocketbike555	Show Off	2	05-09-2007 11:16 PM
Fila Elite Watercooled	tqboy	Pocketbike Sales	29	04-18-2007 09:42 PM
Blata Elite 13	KNIGHT	Pocketbike Sales	7	11-26-2006 10:31 PM
Blata Elite 14 WRS on top of podium one more time in E-Town, NJ	blata	General Chat	0	08-02-2006 01:39 PM
Blata Elite 13	phatbikes	Pocketbike Sales	1	07-26-2006 02:57 PM

05-16-2007, 06:41 PM	#3 (permalink)
thing Pocketbike Beginner Join Date: May 2007 My Gallery Real Name: Daniel Location: La Canada CA Posts: 6	where do you get an elite who makes it

05-21-2007, 09:41 PM	#4 (permalink)
theNatural Pocketbike Master Join Date: May 2007 My Gallery Real Name: Kevin Pocketbikes Owned: 2 Location: BC, Canada Posts: 134	cool bike!!

05-27-2007, 11:16 AM	#6 (permalink)
2bamp Pocketbike Freak Join Date: Jun 2006 My Gallery Real Name: _______________ Pocketbikes Owned: 2 Location: Winnipeg Posts: 428	The frame needs to be straightened first. The back wheel sits about 10-15mm to the left side, and I can't get the chain to align properly. I'm looking for a piece of pipe to slide over the swingarm tubes to bend them straight. I have real Blata brake pads, new levers, Sava MRBs, new wheel bearings and a couple of other goodies to put into it. I also have to make better spacer for the rear engine mount. This is going to be my indoor racing machine.

05-27-2007, 08:47 PM	#8 (permalink)
2bamp Pocketbike Freak Join Date: Jun 2006 My Gallery Real Name: _______________ Pocketbikes Owned: 2 Location: Winnipeg Posts: 428	Get a bunch of 7/16" washers and use a stack of those on the bolt for the rear motor mount. The pieces of tubing that come from on the bike from the factory are useless. Measure the thickness of the spacer, and use enough washers to keep the spacing the same.