My bike (topic split) - Page 2 - PocketBikeForum.com

smith_liquid1 · 11-20-2005, 10:18 AM

[img] this is really hard someone post it on the site or pm me cuz i dont get it[/img]

inthelead83 · 11-20-2005, 12:09 PM

ok go to www.pocketbikepics.com and click on a picture then you go underneathe the picture and you see that url then you copy that then paste is on one of these posts.

Bigbone57 · 11-20-2005, 02:27 PM

Dude you can also go to www.photobucket.com, register, it's free' then upload your photos to your photo album and the you can do the same thing. Meaning this site gives you the url img and that other thing Dhoooo forgot the freak'in other thing........

Quote:

Originally Posted by shawnemerypktbike83

ok go to www.pocketbikepics.com and click on a picture then you go underneathe the picture and you see that url then you copy that then paste is on one of these posts.

smith_liquid1 · 11-21-2005, 08:57 AM

what if it is an image that i want to post from my computer then what do i do

*Sleeves* · 11-21-2005, 10:07 AM

Hey big bone , if you can pm me with exactly what you mean , where the ooozzz is is where near the tip of exhaust or exhaust port , i assume that the chinese are placing too much weld and it is resticting the flow , what did you do , dremil the excess off and replace the tip , or did u re weild , a pic would realy help , by the way those are tai chi's right , would this be something to consider on the c1 water cooled as well!

*Sleeves* · 11-21-2005, 10:12 AM

ok for the retards ( me included ) starting from the exhaust port , there is a semi circle pipe that is screwed to the head of the engine ( call this part one ) then there is the pipe that is attached to part one ( with springs) that goes up under gas tank and to the silencer pipe , will call this part two , and the silencer part three ,
so when you talk about the problem where is located big bone ?

Bigbone57 · 11-21-2005, 12:42 PM

Dude first find the overall lenght of the original set up. Measure from where the weld starts to the end of where the silencer/stinger stops. O.K. (click on link See LP56) where the cone narrows and the stinger is connected/welded... remove the stinger at that weld. (See LP56) Clean up that inside area of all the ozzzzzz. And Tig weld on a new stinger. I used EMT conduit. Its light weight and the right size. Its a little thin so don't burn through it use argile gas & O2 not assutiline. Remember the overall Lenght you need to go back with. Cut the EMT where you need to, then reweld on your silencer to what ever your overall lenght was. I had a Polini silencer (it works better than the stock one) (I got another one it you wanna give it a go)(first come first serve)Note: tip of the day, pipes work the best if the silencer is packed tight, very tight. I use that Cavlar packing. Or just say screw it, send me your pipe and I'll work it for you......I got extra Pipes too. One from a Bangee,Blata Elete 11,, and a few others from various applications

Quote:

Originally Posted by Sleeves

Hey big bone , if you can pm me with exactly what you mean , where the ooozzz is is where near the tip of exhaust or exhaust port , i assume that the chinese are placing too much weld and it is resticting the flow , what did you do , dremil the excess off and replace the tip , or did u re weild , a pic would realy help , by the way those are tai chi's right , would this be something to consider on the c1 water cooled as well!

http://www-staff.lboro.ac.uk/~elvpc/progs/image38.gif
Dude that is a water cooled C-1 (C-1's are water cooled) in the pic and yes it works on Tai Chi's (Tai Chi' are air cooled). I have extra pipes for the Tai Chi too. I don't want to compete with anyone' but I'll sell 'em (only if I don't step on anyone's toes if you know what I mean)

Bigbone57 · 11-21-2005, 12:48 PM

Dude that "Semi circle part" is call the "Exhaust header". And the"part attached with springs" is the 'Body" theeeennnn theres the stinger and the silencer is attached to the stinger. Got it?

Quote:

Originally Posted by Sleeves

ok for the retards ( me included ) starting from the exhaust port , there is a semi circle pipe that is screwed to the head of the engine ( call this part one ) then there is the pipe that is attached to part one ( with springs) that goes up under gas tank and to the silencer pipe , will call this part two , and the silencer part three ,
so when you talk about the problem where is located big bone ?

*Sleeves* · 11-21-2005, 02:05 PM

sure do got it , and know that C1 's Are water cooled , own one myself ,was just wondering f the work ur doing is on a tai chi or c1?

11-20-2005, 12:09 PM	#12 (permalink)
inthelead83 Pocketbike King Join Date: Nov 2005 My Gallery Real Name: Shawn Pocketbikes Owned: 5 Location: Pine Ridge Posts: 1,859	ok go to www.pocketbikepics.com and click on a picture then you go underneathe the picture and you see that url then you copy that then paste is on one of these posts. __________________ RCMRRA - Vice President Proud Owner of: Modded Blata b1 Origami, Blata Elite 11, & Moto-Vert www.rcpra.net 3rd Place overall in CCMRRS 50cc pocketbikes 3rd Place overall in CCMRRS Open Mini Motard

11-21-2005, 10:07 AM	#15 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	Hey big bone , if you can pm me with exactly what you mean , where the ooozzz is is where near the tip of exhaust or exhaust port , i assume that the chinese are placing too much weld and it is resticting the flow , what did you do , dremil the excess off and replace the tip , or did u re weild , a pic would realy help , by the way those are tai chi's right , would this be something to consider on the c1 water cooled as well! __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

11-21-2005, 10:12 AM	#16 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	ok for the retards ( me included ) starting from the exhaust port , there is a semi circle pipe that is screwed to the head of the engine ( call this part one ) then there is the pipe that is attached to part one ( with springs) that goes up under gas tank and to the silencer pipe , will call this part two , and the silencer part three , so when you talk about the problem where is located big bone ? __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

11-21-2005, 02:05 PM	#19 (permalink)
Sleeves Pocketbike Dealer Join Date: Oct 2005 My Gallery Real Name: ??? Pocketbikes Owned: 2 Location: winnipeg Posts: 2,551	sure do got it , and know that C1 's Are water cooled , own one myself ,was just wondering f the work ur doing is on a tai chi or c1? __________________ TRC , Amra , Mra , Smra 06' P1 BMS competition BZM 15.5hp Open 50cc 05' DM Telai - ZPF 18 h.p Open 50cc 08' CBR125r 96' Gsx-r 600

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2005, 10:18 AM	#11 (permalink)
smith_liquid1 Permanent Ban Join Date: Oct 2005 My Gallery Location: east st paul Posts: 311	[img] this is really hard someone post it on the site or pm me cuz i dont get it[/img]

11-21-2005, 08:57 AM	#14 (permalink)
smith_liquid1 Permanent Ban Join Date: Oct 2005 My Gallery Location: east st paul Posts: 311	what if it is an image that i want to post from my computer then what do i do