having problem please help - PocketBikeForum.com

x2malvern · 08-13-2007, 02:09 PM

hey guyz i have a X2 that i bought like couple of weeks ago...i drove it alot of times and so have my friends...one day i lifted it up while it was started and the wheels keep spinning and also the speedometer says 10 km on it...i was wondering if that is normal or if thats a problem...and how can i fix that please help me by telling me step by step instructions..i have no idea how to fix it...thanks in advance

cag07 · 08-13-2007, 02:20 PM

Quote:

Originally Posted by x2malvern

hey guyz i have a X2 that i bought like couple of weeks ago...i drove it alot of times and so have my friends...one day i lifted it up while it was started and the wheels keep spinning and also the speedometer says 10 km on it...i was wondering if that is normal or if thats a problem...and how can i fix that please help me by telling me step by step instructions..i have no idea how to fix it...thanks in advance

is your idle screw set to high? you are talking about while its idling and you lift up the rear of the bike the wheels spins right?

x2malvern · 08-13-2007, 02:28 PM

yes its spinning for no reason...when it is started and the speedometer says its at 10km

x2malvern · 08-13-2007, 02:34 PM

how do i adjust my idle screw to make it stop spinning

cag07 · 08-13-2007, 02:53 PM

back the screw out some you will notice it lowering rpms and your rear wheel will stop spinning.does your carb have a primer bulb on the bottom of the carb? if so its the top screw you need to back out.

x2malvern · 08-13-2007, 02:56 PM

im so lost to be honest i have no idea where the screw u talking bout is located and where the carb is...is that a black block in the front of the motor that has a lever on the side that says on and off...when i put it on off the tire stops spining but then when i rev up the engine shuts down...

cag07 · 08-13-2007, 03:33 PM

Quote:

Originally Posted by x2malvern

hey guyz i have a X2 that i bought like couple of weeks ago...i drove it alot of times and so have my friends...one day i lifted it up while it was started and the wheels keep spinning and also the speedometer says 10 km on it...i was wondering if that is normal or if thats a problem...and how can i fix that please help me by telling me step by step instructions..i have no idea how to fix it...thanks in advance

Quote:

Originally Posted by x2malvern

im so lost to be honest i have no idea where the screw u talking bout is located and where the carb is...is that a black block in the front of the motor that has a lever on the side that says on and off...when i put it on off the tire stops spining but then when i rev up the engine shuts down...

right behind the black box which is your air filter box,the lever is the choke.Behind that you will see a screw with a spring wrapped around it,thats your air/fuel screw.above that is your idle screw its a bit smaller

x2malvern · 08-13-2007, 09:37 PM

so should the idle screw be loose or tight? which way should i play around with it by making it loose or tighthting it...

cag07 · 08-13-2007, 09:45 PM

Quote:

Originally Posted by x2malvern

so should the idle screw be loose or tight? which way should i play around with it by making it loose or tighthting it...

have the motor running while you loosen it you will tell,if you turn it and it revs up your turning the wrong way,also make sure the motor is warmed up too.

x2malvern · 08-14-2007, 12:03 AM

thanks alot for your help i will try it out nex time i get a chance...

08-13-2007, 02:09 PM	#1 (permalink)
x2malvern Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: malvern Pocketbikes Owned: 1 Posts: 9	having problem please help hey guyz i have a X2 that i bought like couple of weeks ago...i drove it alot of times and so have my friends...one day i lifted it up while it was started and the wheels keep spinning and also the speedometer says 10 km on it...i was wondering if that is normal or if thats a problem...and how can i fix that please help me by telling me step by step instructions..i have no idea how to fix it...thanks in advance

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-13-2007, 02:28 PM	#3 (permalink)
x2malvern Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: malvern Pocketbikes Owned: 1 Posts: 9	yes its spinning for no reason...when it is started and the speedometer says its at 10km

08-13-2007, 02:34 PM	#4 (permalink)
x2malvern Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: malvern Pocketbikes Owned: 1 Posts: 9	how do i adjust my idle screw to make it stop spinning

08-13-2007, 02:53 PM	#5 (permalink)
cag07 Pocketbike Freak Join Date: Jun 2007 My Gallery Real Name: joey Pocketbikes Owned: 2 Location: swan hills,alberta Posts: 391	back the screw out some you will notice it lowering rpms and your rear wheel will stop spinning.does your carb have a primer bulb on the bottom of the carb? if so its the top screw you need to back out.

08-13-2007, 02:56 PM	#6 (permalink)
x2malvern Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: malvern Pocketbikes Owned: 1 Posts: 9	im so lost to be honest i have no idea where the screw u talking bout is located and where the carb is...is that a black block in the front of the motor that has a lever on the side that says on and off...when i put it on off the tire stops spining but then when i rev up the engine shuts down...

08-13-2007, 09:37 PM	#8 (permalink)
x2malvern Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: malvern Pocketbikes Owned: 1 Posts: 9	so should the idle screw be loose or tight? which way should i play around with it by making it loose or tighthting it...

08-14-2007, 12:03 AM	#10 (permalink)
x2malvern Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: malvern Pocketbikes Owned: 1 Posts: 9	thanks alot for your help i will try it out nex time i get a chance...