Saturday, Sept. 8th: Zirino's - PocketBikeForum.com

2bamp · 09-03-2007, 08:50 PM

Well, I'm back in town and itching to ride, so I decided to start a thread.

Saturday at Zirino's, the usual schedule will apply. Show up for sweeping and setting up the track from 1000 to 1030, then we ride until we are tired.

The question: Who is in? I know Brent and Elias are coming, but who else? Let's keep the momentum up from the Saskatoon race!

Ford · 09-03-2007, 09:02 PM

Count me in!

inthelead83 · 09-03-2007, 09:53 PM

i will be outta town for a few weeks working in churchill. i will keep in touch with gil though we got a few things we want to get off the ground. And i will be helping in any way that i can. you boys better watch out for elias though!!! keep up the good job buddy we are all proud of ya!

WPG Racer · 09-03-2007, 10:20 PM

%90 sure ill be there!

suicidal_rider · 09-03-2007, 10:55 PM

debating on it..... i have a freakin huge ass suprise for the indoor season!

crazymonkey · 09-04-2007, 06:40 AM

I came out last week and will come down again this Saturday...

WPG Racer · 09-04-2007, 09:18 AM

really hope i get my c2 fixed by then. i think the timing key is busted or something because it idles, runs, and revs really funny.

EDIT: shawn, i just pulled the flywheel off and the timing key looks fine. what do you think it could be?

2bamp · 09-04-2007, 10:39 AM

Quote:

Originally Posted by WPG Racer

really hope i get my c2 fixed by then. i think the timing key is busted or something because it idles, runs, and revs really funny.

EDIT: shawn, i just pulled the flywheel off and the timing key looks fine. what do you think it could be?

Same problem you had before. One of the crank bearings (probably the wrist pin) let go.

WPG Racer · 09-04-2007, 11:00 AM

Quote:

Originally Posted by 2bamp

Same problem you had before. One of the crank bearings (probably the wrist pin) let go.

crap....

where can i get a new one?

would it be hard to replace?

EDIT: just popped the motor out. going to take the head off and see whats up

EDIT: got the head off. the top of the piston looks like its been through a war. lol. but im sure that thats just ware from normal use. the rod that connects to the piston and the crank looks fine. i jiggles from side to side a tiny bit...very tiny bit...on the end that connects to the crank. but it doesnt move up and down on the wrist pin like last time...when everything went to s***. so i dont think that the wrist pin bearing is going. but i dont have a lot of experience in this so correct me if im wrong. btw, on the c2, the silencer snapped off the exhaust. will this differ the bikes performance or shoud i get it fixed a.s.a.p.?

WPG Racer · 09-05-2007, 11:16 AM

crap....

where can i get a new one?

would it be hard to replace?

EDIT: just popped the motor out. going to take the head off and see whats up

EDIT: got the head off. the top of the piston looks like its been through a war. lol. but im sure that thats just ware from normal use. the rod that connects to the piston and the crank looks fine. i jiggles from side to side a tiny bit...very tiny bit...on the end that connects to the crank. but it doesnt move up and down on the wrist pin like last time...when everything went to s***. so i dont think that the wrist pin bearing is going. but i dont have a lot of experience in this so correct me if im wrong. btw, on the c2, the silencer snapped off the exhaust. will this differ the bikes performance or shoud i get it fixed a.s.a.p.?

EDIT: help

09-03-2007, 08:50 PM	#1 (permalink)
2bamp Pocketbike Freak Join Date: Jun 2006 My Gallery Real Name: _______________ Pocketbikes Owned: 2 Location: Winnipeg Posts: 431	Saturday, Sept. 8th: Zirino's Well, I'm back in town and itching to ride, so I decided to start a thread. Saturday at Zirino's, the usual schedule will apply. Show up for sweeping and setting up the track from 1000 to 1030, then we ride until we are tired. The question: Who is in? I know Brent and Elias are coming, but who else? Let's keep the momentum up from the Saskatoon race!

09-03-2007, 09:02 PM	#2 (permalink)
Ford Better than average Join Date: Jul 2006 My Gallery Real Name: Jesse Pocketbikes Owned: 2 Location: The Peg Posts: 50	Count me in! __________________ #19 Hey Man, C2 at the finish line, or maybe the Elite Rep, or maybe none at all :(

09-03-2007, 09:53 PM	#3 (permalink)
inthelead83 Pocketbike King Join Date: Nov 2005 My Gallery Real Name: Shawn Pocketbikes Owned: 5 Location: Pine Ridge Posts: 1,865	i will be outta town for a few weeks working in churchill. i will keep in touch with gil though we got a few things we want to get off the ground. And i will be helping in any way that i can. you boys better watch out for elias though!!! keep up the good job buddy we are all proud of ya! __________________ RCMRRA - Vice President Proud Owner of: Modded Blata b1 Origami, Blata Elite 11, & Moto-Vert www.rcpra.net 3rd Place overall in CCMRRS 50cc pocketbikes 3rd Place overall in CCMRRS Open Mini Motard

09-03-2007, 10:20 PM	#4 (permalink)
WPG Racer Pocketbike Freak Join Date: Apr 2006 My Gallery Real Name: Yuri Pocketbikes Owned: 2 Location: Winnipeg, Manitoba Posts: 408	%90 sure ill be there! __________________

09-03-2007, 10:55 PM	#5 (permalink)
suicidal_rider Pocketbike Lord Join Date: Apr 2006 My Gallery Real Name: Jared Frizell Pocketbikes Owned: 4 Location: winnipeg, manitoba Posts: 729	debating on it..... i have a freakin huge ass suprise for the indoor season! __________________ BigBone rider TeamRiverCity Rider Smra 40cc class winner I guess I had an overall finish of 3rd in the 40cc class(Pitster PRO) BUT ONLY CAUSE OF THE TEAM!

09-04-2007, 06:40 AM	#6 (permalink)
crazymonkey Pocketbike Beginner Join Date: Aug 2007 My Gallery Real Name: JS Pocketbikes Owned: 2 Location: Winnipeg Posts: 8	I came out last week and will come down again this Saturday...

09-04-2007, 09:18 AM	#7 (permalink)
WPG Racer Pocketbike Freak Join Date: Apr 2006 My Gallery Real Name: Yuri Pocketbikes Owned: 2 Location: Winnipeg, Manitoba Posts: 408	really hope i get my c2 fixed by then. i think the timing key is busted or something because it idles, runs, and revs really funny. EDIT: shawn, i just pulled the flywheel off and the timing key looks fine. what do you think it could be? __________________ Last edited by WPG Racer : 09-04-2007 at 10:04 AM.

09-05-2007, 11:16 AM	#10 (permalink)
WPG Racer Pocketbike Freak Join Date: Apr 2006 My Gallery Real Name: Yuri Pocketbikes Owned: 2 Location: Winnipeg, Manitoba Posts: 408	crap.... where can i get a new one? would it be hard to replace? EDIT: just popped the motor out. going to take the head off and see whats up EDIT: got the head off. the top of the piston looks like its been through a war. lol. but im sure that thats just ware from normal use. the rod that connects to the piston and the crank looks fine. i jiggles from side to side a tiny bit...very tiny bit...on the end that connects to the crank. but it doesnt move up and down on the wrist pin like last time...when everything went to s***. so i dont think that the wrist pin bearing is going. but i dont have a lot of experience in this so correct me if im wrong. btw, on the c2, the silencer snapped off the exhaust. will this differ the bikes performance or shoud i get it fixed a.s.a.p.? EDIT: help __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode